No actually I don't think he has. I know I have pumped the heck out of it and we also seen that if you take the master cylinder out to bleed it it works better because of the design there is an air bubble and you can't get out and the only problem with that is you can't get the master cylinder back in without taking the fitted line off.
How do you bleed the clutch it seems like we've tried everything except the right thing apparently
1994 Ford Ranger STX Extended Cab 4WD SB
-
Maintenance & Repair
I was.at a stop light and my brake pedal went straight to the floor... I get some pressure but it dissipates really quick and there is fluid in the master cylinder.. Help
2006 Ford Escape XLT FWD
-
Maintenance & Repair
Every now and then when I push on the brake the light will go on and it will go down but then it will pump back up and I am wondering if that has anything to do with the master cylinder?
1985 Ford Ranger
-
Maintenance & Repair
i have a 07 ford focus 2.0 automatic, it looks hard to get the master cylinder off, because i dont see the bolts to take off the mastyer cylinder, the fire wall panel is in the way ?
2007 Ford Focus ZX3 S
-
Maintenance & Repair
Can I use a 1 1/16 Master brake cylinder instead of a 1 3/16 master cylinder. I have the 1 3/16 already on
2003 Ford F-150
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.