i went to auto zone to have my engine light reset and a code error came back saying i need to replace the gaskets on my intake manifold i wanted to know if the job is 1300.00 parts and labor accurate

i went to auto zone to have my engine light reset and a code error came back saying i need to replace the gaskets on my intake manifold i wanted to know if the job is 1300.00 parts and labor accurate 1 Answer

I have a 2003 Monte Carlo 3.8 V6. Do I need to replace the engine if the head gasket is blown and it has overheated? 5 Answers

I bought a 2003 Monte and was told nothing was wrong with it. I've had it 6 mo. and it started overheating. We replaced the thermostat and flushed the radiator. it ran fine for 2 wks and started ove...

i have a 95 Monte Carlo ls coupe and my low trac light came on for a little bit and then shut off and when i step on the gas pedal it revs to high and doesn't want to give it barley any gas. like it will go but barley. any ideas as for whats wrong? 1 Answer

low trac light came on for a little bit. and gas pedal doesn't want to work right. recently put new fuel pump in, and new heads.

I HAVE MONTE CARLO SS, MY VIN # HAS "1WX15K" IN IT I HAVE BEEN ASKED ON SEVERAL OCCASIONS IF MY VIN HAD "1WX27K" I HAVE ALWAYS I HAVE THE HOTTES VERSION OF THIS MODEL (?). I NEED TO UNDERSTAND WHAT IS THE DIFFERENCE BETWEEN THE "1WK15" AND THE "1WX27" VIN? 5 Answers

CAR IS A 2003 MONTE CARLO SS.

My monte carlo is a barrel v8. I have a problem, when i start it and it is idling it runs fine but when i go to put it in drive and try to run it it pops at the catylytic converter and it back fires and turns off and then it is hard to turn on. I have changed oil,oil filter,fuel pump, rubber hoses coming from carb, plugs and wires,distrubitor cap and rotor,fuel filter, and rebuilt carberator. I need help timing is adjusted as well. 1 Answer

all has been changed that I think is the problem do you guys think the catalityc converter is bad or a timing issue?