No movement when transmission is shift to drive and third 1st 2nd and reverse works only drive works when im passed 20 miles and i threw it in drive then it will drive but when i come to a stop it don

Yu dont think its the transmission control solenoid somebody told me it could be that

Yu think it could be transmission control module

i am wondering mark,he said she hit a bank,and i am having same problem,i notices sometime jacking it up maybe,i dented the trans. cover bad.wondering if this might be possible.bad time to have flue.im gonna do this first see what happens.i was also wondering about that.you can check them with ohmeter and or test light.you have to have book with schematic,and back-probe hot wires.u can use a light.two give a solid power input when in selected gear and i think the torque converter pump sol,will blink.wld have to read it again.have 3 projects goin on.sorry to jump in on conversation.i just know that even o2 sensor can show these codes.with all the technology the comp. can still store and even overload ecm which causes mis-readings.this is why i try continuity and alot i have done,and only 1 out of about 100 vehicles was broken,or corroded wire.but ill check all issues and kc boy stated.have a nephew said as you did and someone else,but i am moving fluid.thank you sincerely