Brake lights and cruise control

Step 1.Use a multimeter check for 12volts at the brake light socket(s) when someone depress the brake pedal..IF no voltage work your way upstream until you get voltage.. be sure to check grounds as you work through the circuit. You'll locate the issue Its NOT, magic,Of course you checked every FUSE(S) in all the power boxes before getting to this point? Right. Regards

What ended up solving this issue. I’m having the same problem

Mine was same no brake lights or cruise, turned out to be the connector that plugs into the brake switch had 1 wire and the contact overheat and slightly burn , there is a video someone made on YouTube