If it is miss firing on #7... the spark plug, coil on plug or fuel injector will likely be at fault. If the #7 spark plug is fouled... it could be a stuck open fuel injector, bad valve guide seal or piston ring or cylinder issue. Could also be a head gasket issue. The question you asked is very vague, please be more specific and supply more info.
2003 Ford Explorer Limited V8 AWD
-
Maintenance & Repair
We lost a line on transmission we filled it back up with transmission fluid and it feels like it's being held back in drive
1994 Ford Explorer
-
Maintenance & Repair
The blower motor only works on high I barley comes out on the other 3 settings what could be wrong
2010 Ford Explorer Eddie Bauer 4WD
-
Maintenance & Repair
A few weeks ago, my engine had random periods of what I can only describe as stuttering, which would last a few seconds and then smooth out. The RPMs remained steady and it did not overheat. It flas...
2011 Ford Explorer Limited
-
Maintenance & Repair
I have just replaced my fuel pump and sending unit plus new plugs and wires came up trouble codes engine misfire cylinders 3 and 6 replaced the coil pack engine light went off but still has a miss w...
2000 Ford Explorer XLT 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.