No power to #1 and #4 cylinder from ignition coil.
Asked by ruffnec1980 Jan 26, 2017 at 08:25 AM about the 2004 Dodge Grand Caravan SXT Aniversary Edition FWD
Question type: Maintenance & Repair
Wife's van started missing the other day. Popped
hood to find ignition coil was cracked and started
to melt. So I replaced the coil, wires and plugs. Still
missing. So went ahead and replaced o2 sensors,
camshaft sensor and crankshaft position sensor.
Still missing. Took it and had the codes read (sorry
do not remember exact code). But it had to do with
primary power to coil. Their suggestion was faulty
coil. So took off new coil and exchange it. Also
replaced electrical connector to coil. Still missing.
Started digging a little deeper to find out I'm not
getting any power or spark to the #1 and #4
cylinder. Has anyone ever ran into this before?
7 Answers
Did you check the wire going to the plug for a short or crack ?
Also if you are not finding any more problems with the electrical, then check the compression of the cylinders.
ruffnec1980 answered 7 years ago
I checked wires back until they ran into main harness
I have the same issue.. Replaced coil and wire but no luck still no spark
Just wondering if you ever found out what exactly was the problem I'm having the same issues and replaced plugs o2 sensors and wires and now I'm popping up another code p0700p any suggestions
Did you find an answer to the problem? I am having the exact same problem
Any answers here, exact same missing spark from 2 wires then a meltdown ifor a new installed coil
