Your Answer:
Related Questions
-
why do i have to spray gas in the throttle to crank it I a new air control valve I put throttle position sensor do you have to spray gas to crank it it want crank by itself help me 1 Answer
1994 GMC Sierra 1500 C1500 SL Extended Cab SB
-
Maintenance & Repair
-
i have 94 gmc 1500 5.7 an i have to spray gas in the throttle to crank it what could it be 3 Answers
1994 GMC Sierra 1500 C1500 SL Extended Cab SB
-
Maintenance & Repair
-
Why does my engine have to crank over more times before starting than it used to? 3 Answers
My truck has always popped right off when I hit the key. Of late, it seems to crank for 3-4 seconds before starting. Runs fine. Battery was weak so I recently replaced. Seemed to help but didn't...
1998 GMC Sierra 1500 C1500 SLE Extended Cab SB
-
Maintenance & Repair
-
Rough idle and misfiring at lower rpms. If I stomp on it it seems to run smoother. Replaced fule filter, cap and rotor, pcv valve, crank and cam position sensors, mass air flow sensor,. 1 Answer
After all parts were replaced I disconnected both battery cables and touched them together per a mechanics suggestion to "clear the computer ". Would a dirty egr cause this? Please help.
1997 GMC Sierra 1500 K1500 SL 4WD Extended Cab SB
-
Maintenance & Repair
-
04 gmc sierra 1500 5.3 died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was zero) anyways checked fire none checked injectors they wasnt working either(built fuel pressure then unplugged fuel relay then turned engine over and the pressure stayed the exact same) i assume it might be the crank sensor but i would think it would throw a code, anyways came back this morning and before doing anything for the hell of it i checked the gas cap and tightened it and it fired up perfect three different times and the last time i let it run and it died after bout 45 seconds (fuel pressure reads 55) and after it died its doing the same thing cranks but wont fire or start 1 Answer
died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was...
2004 GMC Sierra 1500
-
Maintenance & Repair
Shortcuts
Search GMC Sierra 1500 Questions
CarGurus Experts
-
#1yetilikesbeerReputation12,810
-
#2dragonflyoffshoreReputation11,750
-
#3John SaffrahnReputation11,690
Find great deals from top-rated dealers
SearchRelated Models For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.