Wondering if a set of 2016 stock oem gmc rims will fit my gmc sierra 2000 4x4?

As long as the bolt pattern is the same, they will have no issues bolting up. On the other hand, you need to make sure the tires are not too big to fit on the truck they are being mounted on. Are they the "stock" tire size? If so, you should be just fine.

Well ill keep it on the stock tires for a few and then swap them out for some all terrain 33 x 12.5 R20. These are the oem rims i would like.....

Are they the same model truck?

It looks like the bolt patterns should be the same at 6X139.7, so as long as the tires aren't too big, you'll be good as gold!

I always use https://www.wheel-size.com/ to verify bolt patterns. Hope this helps!

Those wheels come off a Sierra or a denali if i'm mistake but i figure both models run the same bolt pattern, but for the usual those are Sierra rims. And ill check out the link right now! Thanks

Looks like they are the same, but definitely verify first. You're welcome!

I checked out the link you provided and sure enough the bolt pattern is the same at, 6x 139.7, and the center bore even matched up at 78.3, the only thing that didn't match up was the thread size my truck has a thread size of (M12 x 1.5) and the newer trucks are size (M14 x 1.5). Is that going to be a problem? or just simply change the thread size?

I have a 2012 GMC Terrain suv and I would like to know if the rims off Yukon suv fit on my GMC Terrain

How much for one of these rims