does the bolt on transmission pan have a nutplate?
i took the bolt out of the transmission pan to change the fluid and now the bolt just wobbles around in the hole when i try to reinstall it
Asked by david91363 Dec 18, 2012 at 03:58 PM about the 2004 GMC Sierra 1500 2 Dr Work Truck 4WD Standard Cab LB
Question type: Maintenance & Repair
i took the bolt out of the transmission pan to change the fluid and now the bolt just wobbles around in the hole when i try to reinstall it
i took the bolt out of the transmission pan to change the fluid and now the bolt just wobbles around in the hole when i try to reinstall it
2004 GMC Sierra 1500 2 Dr Work Truck 4WD Standard Cab LB
-
Maintenance & Repair
I swapped the automatic to manual transmission on a 1995 GMC Sierra and I have trouble passing emissions at idle in the state of Arizona. Just wondering if anyone knows if it has anything to do with...
1995 GMC Sierra 1500 K1500 SL 4WD Extended Cab SB
-
Maintenance & Repair
i need some advice on proper way to remove bad seal and installing new one. i have done this once before on the same truck and it had minor leak in it since so i dont want that to happen again. ive...
2002 GMC Sierra 1500 SL Extended Cab SB
-
Maintenance & Repair
THE TRANSMISSION WOULD ONLY SHIFT FROM 1 TO 2 BUT IT WOULD NOT SHIFT TO DRIVE OR WHEN YOU GO TO DRIVE IT WOULD STELL BE IN 2 DROVE LIKE THAT FOR A WHILE BUT ONE DAY COMMING FROM CHURCH THERE WAS A CLU...
GMC Sierra 1500
-
Maintenance & Repair
It only does it in the mornings and it sounds like something is either loose or just vibrating against other metal. I have no problems with the truck or from what i can tell it just makes that annoy...
2015 GMC Sierra 1500 Base
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.