Why did my Audi not start after changing the valve cover gasket
Asked by Cayenne_41436505 Feb 22, 2017 at 02:51 AM about the 2003 Audi A4 1.8T quattro Sedan AWD
Question type: Maintenance & Repair
I only change the valve cover gasket, then the engine will only turn but will not
start.
5 Answers
enginecreator answered 7 years ago
Did you disconnect the battery if not may have blown a fuse, look under dash and hood for the fuse panel and check and check all electrical connection were put back together tight and recheck your work.
If you didn't touch anything while you did the work then its a separate issue you are having it may have just happened at the same moment....
Cayenne_41436505 answered 7 years ago
It was the master engine control fuse 20 amp, driver side panel
enginecreator answered 7 years ago
One reason its best to unhook the negative battery terminal before doing repairs.
StasVidal24 answered 3 years ago
Did you car had power and just wouldn’t start? And did it say the ignition was on?