My steering wheel is in the down position
The steering wheel is in the down position and I cant get it to go back in a up
position?
Hornet_2497 answered 6 years ago
Next to the turn signal lever is a smaller lever. Pull it back with your left hand while lifting the steering wheel with your right hand. That should do it unless there is something broken I don't know about yet.
The steering wheel is in the down position and I cant get it to go back in a up position?
1997 Jeep Grand Cherokee Laredo
-
Maintenance & Repair
The steering wheel and the front end of my 1993 Grand Cherokee shake/vibrate drastically when I go over a small dip in the road at high speeds. The shaking/vibration stops after about 10-15 seconds o...
1993 Jeep Grand Cherokee
-
Maintenance & Repair
I drive a 98 Jeep Grand Cherokee Laredo and a few weeks ago I turned into a gas station and something made a loud ping noise in the front end, since then when I go over bumps it makes a hollow thump ...
1998 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
I've already changed a lot of parts due to a similar problem. I changed all four tirod ends,both front wheel beerings,the ball joints in front, the track bar,right&left CV axels,also rebuilt the fro...
2003 Jeep Grand Cherokee Limited 4WD
-
Maintenance & Repair
when in 4x4 full time and i try to turn sharply like backing out of a driveway my steering gets stiff and jerks back and forth until i straighten my wheel. possibly needs an alignment? cant think o...
1998 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.