If your transmission belhousing has a removable plate on the bottom / front edge (to access the flex plate-torque converter bolts) you might be able to push it out from the inside. You also may be able to drill a hole in it, screw a screw into it and pull it out with pliers
Is there any easy way to get a crank sensor out that broke off flush or is it going to be the empty the bank kinda deal
1999 Jeep Grand Cherokee Limited 4WD
-
Maintenance & Repair
Need to find and test the crank position sensor
1995 Jeep Grand Cherokee Limited
-
Maintenance & Repair
No crank no start replaced battery, alternator,fuses. Crank sensor,spark plugs,wires,distribute r,rotor.no crank no start.everything comes on turn to crank and nothing not even a noise and ev...
1995 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
2002 Jeep Grand Cherokee 4.7L after sitting for sometime it starts. Go to the store park it come out crank but no start. changed crank sensor 2 times cam sensor ones and PCM. last time it did it che...
2002 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
Jeep won't crank, no click, nothing. Any suggestions.
1996 Jeep Grand Cherokee Laredo 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.