On 97 lincoln parts i cant identify bent in accident
Asked by 63315 Apr 07, 2017 at 11:00 PM about the 1997 Lincoln Town Car Executive
Question type: Maintenance & Repair
2 parts both same tubes steel
approximately 3 ft long flat on ends 2
bolts each end. From crossmember to
frame in a V shape crs mem is the one
that frt allinment picks up frd calls it the
num 3 cross member. They cant i.d. part
as frd says car obsolete parts houses
also cant i.d. need name of part to try to
find 1
12 Answers
enginecreator answered 7 years ago
Can you take a picture of it while using something to point at it?
Unfortunately no have to put cst up on rack to access is do you have access to chilton man #2650 if so om page 1-35 there is a pict of oil pan drain plug you can see 1 end of part pict in top right.on page 1-37 bottom right trans pan you can see the part funs from cross member goes under exhaust can see full part including 2 bolts each end nowhere does chilton or haines mention this part.ps you were right about the lower control arm beig bent is twisted thanks
enginecreator answered 7 years ago
O.k I figured out what your talking about. I will find a pick and try to find the name, but its like stabilizers bars or torsion bars, Supports I think it is some cars have them going across the top side of engine compartment. not your car but they are at the top of this picture.
enginecreator answered 7 years ago
K-Frame cross member reinforcement Support Bar, one right front is the passenger side and left is drivers side. K Frame Support.
Yes. Do you know what they are called when i called around to part houses frd autzne orirlly napa they dont have listing for swaybar or tortion bars in that position on this car. I am going to take your picks with me to show them.the 2nd pic really shows what it looks like the best Thanks again! !!!!
enginecreator answered 7 years ago
Steel Tubular Frame Stabilizer Bars, they help provide support to the K-frame cross-member section of frame. I would call them (K-member Frame Braces or supports) or (Center Frame Section Braces or supports) with the above description. You best move to get these is to go to a junk yard or pull-a-part or ebay and buy or pull these yourself. I do not think this is a auto parts store item it like auto-zone having a frame or transmission cross-member for you car, they do not so you either go to the junk yard or the dealership, since yours is a older car its the junk yard.
Thanks again you have been a Great help. Your right about parts houses not having them.unfortunately a car this old is impossible to find.all been crushed. i will look at other kind of cars to see what has them.then hit junk yards.ebay doesnt have then .many thanks.
Engincreator:found part name "rod frame stabilizer. Ford part # e0ly5c024a.ford discontinued.Moog and dorman also dont carry.They both gave me some other leads i am trying to tract down if i can find them at one of these places i will let you know So you have info if you need again Thaks again for all your help.