Asked by Jimmy Mar 03, 2017 at 10:41 AM about the 2000 Lincoln Town Car Signature
Question type: Maintenance & Repair
My brake light work fine but I have to mash really hard to get them to come. I
know I need to do something with the bake switch just not sure exactly what.
HELP ME PLEASE!!!!!!!
Find the switch along the brake pedal lever, first see if it got knocked out of alignment with the pedal and needs straightened, if it's okay but still not working swap it out. It's a plunger type switch, so hopefully for you it just needs to twisted back into place.
i just got back from a shop and they said my calipers needed to be changed. I admit I haven't done that since I've had the car. two years
My brake light work fine but I have to mash really hard to get them to come. I know I need to do something with the bake switch just not sure exactly what. HELP ME PLEASE!!!!!!!
2000 Lincoln Town Car Signature
-
Maintenance & Repair
how do i know that brake light wont come on due to bad brake switch
1992 Lincoln Town Car Executive
-
Maintenance & Repair
my cooling fan in my 2003 town car turns on as soon as i start car with cold engine. Then it shuts off when I shut car off.
2003 Lincoln Town Car Cartier
-
Maintenance & Repair
I’ve replaced master cylinder brake booster and pads and rotors any suggestions to why brake pedal goes to the/ sounds spongy
2001 Lincoln Town Car Executive
-
Maintenance & Repair
Car cranks but won't start. I have replaced the fuel pump and battery so far.I can get it to run if I run a wire from the battery directly to the fuel pump and start it. Also it will run if I spray ca...
1999 Lincoln Town Car Signature
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.