Asked by Vapelife83 Oct 31, 2015 at 05:24 AM about the 1994 Oldsmobile Cutlass Supreme 2 Dr STD Convertible
Question type: Maintenance & Repair
May need to adjust it, look to see if the plunger is releasing all the way from the break pedal.
BigcrazyMike54 answered 9 years ago
After installing the switch you'd most likely have to adjust it. As Rowefast stated you must make sure the plunger is releasing all the way.
1994 Oldsmobile Cutlass Supreme 2 Dr STD Convertible
-
Maintenance & Repair
I have a 1995 Oldsmobile cutless surpreme sl and my brake lights dont work when i brake also the turn signals or hazards dont either.at first the signals workd then just the left did.i checked an...
1995 Oldsmobile Cutlass Supreme 4 Dr S Sedan
-
Maintenance & Repair
1994 Cutlass Supreme 4 Dr. Interior lights are erratic when closing dr. side door sometimes they stay on and the "roller" switch on the main light switch won't turn them on or off. When they work, I...
1994 Oldsmobile Cutlass Supreme 4 Dr Special Edition Sedan
-
Maintenance & Repair
Hi i have a 1988 Cutlass Supreme FWD. My brake lights are stuck on. I have replaced the stoplight switch and the steering column. they are still on. Does any one know if the stoplight switch is adjust...
1988 Oldsmobile Cutlass Supreme
-
Maintenance & Repair
My car’s brake lights won’t come on when I press the pedal. The lbulbs have been replaced and work when the headlights are on and the hazards are on. The fuses have been checked and they are fine....
1994 Oldsmobile Cutlass Supreme 4 Dr S Sedan
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.