How do I remove the tire pressure sign
8 Answers
firebird338 answered 9 years ago
Do not know if you remove all the sensors on each rim will do it but to remove each sensor tire will have to be removed from rim an install a regular value stem. As far as just removing a fuse do not know but I can imagine that fuse also goes to something else. Last thing dash has to be removed to get to bulb.
If you mean get the light off, inflate all tires to spec on drivers door, or on chassis. Them even 1 or 2 psi more. Then the light will go out
firebird338 answered 9 years ago
Hey FordNut well that work even if you have a bad sensor that makes light stay on already or do the sensors have to be working for that to work ?
No, firebird338. A faulty sensor the light will stay on. I was just going under the assumption that the OP Darlah had or has a low tire. Have a look-see at these sites. Lots of good information
http://www.moderntiredealer.com/channel/retailing/article/story/2013/10/direct-indirect-tpms-on-grand-prix.aspx
http://www.thetpmsforum.com/showthread.php?1739-Pontiac-Grand-Prix-%282004-2006%29-TPMS-Reset-Procedure
http://www.2carpros.com/questions/pontiac-grand-prix-2004-pontiac-grand-prix-air-pressuure-monitor
