1992 Corvette, A/C fan runs continuously. Some say relay problem/ New to vettes. Where do I start?

1992 Corvette, A/C fan runs continuously. Some say relay problem/ New to vettes. Where do I start? 1 Answer

Stalling when hot... My 1967 427/400 Hp L68 Corvette stalls when I drive it for approx 15 to 20 minutes after a short time it will start back up and do it again. What is the problem? When it run is runs very strong. 6 Answers

My 1967 vet stalls after driving it for approx 15 minutes. If I wait a few minutes it starts back up only to repeat the problem. It has 3/2 barrel Holly carbs and they have been rebuilt. Can it b...

CORVETTE COOLING FAN RELAY SWITCH QUESTION 9 Answers

My cooling fan does not come on all the time. In fact, it comes on intermittently for some reason. I shook the wire and it came on and now it doesn't want to come on. The fan used to come on as s...

I have a 95 corvette, does the secondary fan only come on with the A/C running? 2 Answers

I have replaced the radiator, thermostat, and temp switch. The primary fan comes on at about 225 to 230 degrees. Ive noticed the digital and analog gages do not read the same. the Analog gauge reads...

I have a 1969 Chevy Corvette. I have rebuilt or replaced almost every thing. I have not replaced the original A/C compressor but converted it to the new Eco friendly freon. I had it tested three times, had the cooler boxes cleaned out, fan replaced, yet I have trouble getting the car cool. I live in So. Cal. where it is a necessity of life to have the A/C work as good as when new from the factory. I put in heat/sound shielding under the floor mats, and had all components check for proper functioning. I was thinking of going to a serpentine belt system that would get the newest A/C compressor with the system. Has anyone done this or have any suggestions? 9 Answers

The A/C system does not leak, holds the proper pressure