Fuel gauge doesn't work
2 Answers
Possibly under the back seat...
1 people found this helpful.
For the 05, my info says you drop the gas tank to get at the fuel pump. note the diagram for sending unit. See the two wire collars. maybe you can get at wire connector w/o dropping the tank? If so, take connector loose, use resistor between those two wire colors. 40 ohm resistor represents empty, 250 ohm resistor represents full. Key on, if gage reacts properly, the problem is the sending unit, most likely. If gage does not react properly, the problem maybe the wiring circuit or instrument cluster? Radioshack has resistors among other places. Good luck
2 people found this helpful.