i took out the two cams how do i line them up puting them back

i took out the two cams how do i line them up puting them back 1 Answer

How do I remove the piston supports for the rear hatch on a 86 tercel? 2 Answers

How does the rear hatch support piston come off and go back on?

car was running fine, recently inspected, hit a pot hole, immediately after the car died & now it won't start or even crank over..how do i troubleshoot...can't afford a shop, need a DIY fix 2 Answers

checked the battery, the gas, car has power (radio/lights), thought maybe the connection to the starter was loose, but i took out the smaller of the 2 wires (cliped) to the starter and re clipped it -...

what to do about a stripped crankshaft pulley bolt do i go up to the next size bolt 2 Answers

i retapped the hole with 12mm tap but the bolt is sloppy doesnt seem to tighten properly and i dont know if a helicoil is strong enough to fix this problem or is there another solution>

I have a 97 toyota tercel and wont go faster than 30 miles per hour, I thought it was the catalytic converter so I replaced it and still does the same, what can I do? 4 Answers

the car starts normal but as soon as it gets warm it wont go faster than 30mph and i can feel like it starts to shake or hear some clunk in the front, so I thought it was the CAT converter so I repl...