what to do ?
Asked by fordman1994 Apr 28, 2016 at 04:45 PM about the 1994 Ford F-150 XL SB
Question type: Car Customization
i have a ford f 150 we installed a built 5.0 roller cam roller 1.7 rockers
supercomp heads 207 intake 34 pound injectors 75 mm throttle body the cam
is about 290 duration 590 lift mustang intake is ported hooker headers ! can i
have someone burn a new chip ? waiting for a new mass air sensor too
accomidate the upgrade !
4 Answers
there are several ways to do that > http://www.summitracing.com/search/section/computers-chips- programmers/make/ford/engine-size/5-0l-302/part-type/computer- chips-and-modules? N=4294943182%2B4294951343%2B4294951339%2B4294923858
Ford has never had a replaceable "chip". You must use a programmer and to do things correctly you may need a dyno tune. Sometimes some research before modding helps. Best of luck with it.
Auto_Centric answered 8 years ago
The old Ford EECIV intel 8061 processor computer can run different "chips"- or tunes various company's offer there version for Ford ECCIV The engine management is easy too 5.0s are well documented. I'M sure you know with such a CAMMED and 1.7 rockered engine you will need a Real tune no Tweecer! be sure and match the calibration of the MAF to the HUGE 34lbs injectors too. Regards
