There is no oil on the dipstick and my engine wont start although i can hear the fuel pump prime. Is this because of the oil pressure switch stopping the flow of fuel?

There is no oil on the dipstick and my engine wont start although i can hear the fuel pump prime. Is this because of the oil pressure switch stopping the flow of fuel? 7 Answers

is there any way to fix one of the white tips on a fuel pump, 3 Answers

i was puting a fuel pump in my 2000 chevy blazer and broke one of the white tips off,is there any way to fix or rigg it so it will work,i was thinking of a tube to slide into the broken place and try ...

We replaced a bad 4.3 vortec engine in a 1999 blazer with a 4.3 vortec engine out of a 2002 blazer, both blazero were 4 wheel drive. I can switch the blazer on and I hear the fuel pump come's on, 1 Answer

The engine will not turn over attempt to start or anything but fuel pump and dash lights come on like the should . No sound at all from the starter, and there was no issues with the start befor...

Where is the fuel and oil switch on a 2001 chevy blazer and how can I tell if it is bad? 2 Answers

Or how can I reset the system?

I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control module. We coming to a stop sign it will stall and sometimes when just sitting still. Sometimes it will start right back up and other times it takes several tries. I also have the oxygen sensor on order and it should be here tomorrow. Fuel pressure tested perfectly. No black smoke, no smell of rotten eggs or the cat glowing red. The only code that comes up is PO420. 4 Answers

I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control m...