On a 91 s10 with inline 4 cyl, will a bad slave cylinder cause the clutch not to work when cold but work fine once motor is hot?

On a 91 s10 with inline 4 cyl, will a bad slave cylinder cause the clutch not to work when cold but work fine once motor is hot? 5 Answers

My nephew has a 99Chevy S10 V6. Ran just fine on way to work today but now won't start. Has full tank, lights don't dim when turning engine over but will not start up. 1 Answer

Has plenty of gas in tank, when turns key, lights don't dim, engine turns over but will not start up. Any ideas?

Start a new question...My name is Ben, 2001 S10 will not turn over sometimes and fuel pump does not come on even the headlights don't burn. Does this intermediate replace ign switch and checked all connection. When I turn ign switch on and headlights burn, fuel pump comes on and it will run. Jumped fuel pump and starter relay they work. Sometimes it will run for a month with no problems. 2 Answers

My name is Ben, 2001 S10 will not turn over sometimes and fuel pump does not come on even the headlights don't burn. Does this intermediate replace ign switch and checked all connection. When I turn ...

I have a 1995 S10LS V6TBI engine in it. I am having a problem with the air conditioner blower motor. When you turn it on. it may or may not work and blow air for you. You can feel the cold air at the vent. but no blower to get it into the cab. I have already replaced the blower switch and it didn't help. Now I am stuck between the relay, the resistor or the motor itself trying to go out. Any help would be greatly appreciated. 1 Answer

1995 Chevy S10LS V6 TBI Engine Problem with a/c blower motor not working all the time Replaced blower motor switch and it still cuts in and out when it wants to Would the relay or the resistor cause t...

hello i have a 91 s10 with the 4.3 v6 the truck ran great with a broken motor mount on the driver side but after replacing it the truck wont start motor is getting gas fire and air PLEASE HELP 2 Answers

4.3 v6 with 3k+ miles ran great did full tune up still ran great then i replaced the driver side motor mount and it wouldn't start i used a jack to lift the motor to replace the broken mount im gett...