surges.jerks.replaced fuel pump,ignition control module still wont start

surges.jerks.replaced fuel pump,ignition control module still wont start 2 Answers

i have a 1991 s-10, i have replaced the fuel pump but it still wont start. 7 Answers

It was spitting and sputtering bad. I changed the fuesl pump and fuel filter. Still wont start. Getting fire but wont pump gas correctly

WHY WONT MY FUEL PUMP WORK 10 Answers

I bought a new fuel pump for my 1989 S10 pickup 2.5L and it wont kick on.i checked the volts on the pump and at the plug while a friend bumped the starter and its over 12 volts.i replaced the fuel r...

Can the ignition control module on a 1997 Chevy S-10 be tested on a testor , be passed as OK and still be failing when installed on the engine? 1 Answer

Truck would start, but would not run when throttle was opened. Replaced fuel pump, Pressure regulator,and filter. It started right up, responded to throttle just fine, and I took it out for a test ...

whats wrong, pump wont shut off and keeps spraying fuel? 3 Answers

i recently parked my truck in my driveway and it slid down and hit a tree, i left it running however though, i went three miles to town and then i came back home and parked it. the next morning i w...