ehart13169 answered 10 years ago
Haynes manuals have a wiring diagram for most vehicles that will show you how the wiring connects. If you're putting in an aftermarket radio I would recommend that you get a vehicle-specific wiring harness from Crutchfield. It will come with instructions and the radio wiring diagram so that you can connect the new radio to your existing wiring.
Someone cut out the wiring harness so I have to ree wire it
1995 Chevrolet S-10 LS LB 4WD
-
Maintenance & Repair
I have a bad connection somewhere in the wiring of my 2000 blazer. Of course everything under the ttruck is corroded for wires. I just cut about 5 1/2 feet of the wiring from just infront of the fuel ...
2000 Chevrolet S-10
-
Maintenance & Repair
I've checked the wire ,grounds flasher
2001 Chevrolet S-10 LS RWD
-
Maintenance & Repair
Engine is a V-6 2.8 liter
1982 Chevrolet S-10
-
Maintenance & Repair
i have a 1988 s10 pickup extended cab pickup with a 2.8 engine and i am wondering if the 700r4 trans would be able to swap out with a 700r4 trans for a 2.5 or a 4.3 engine? i am having a really hard...
1988 Chevrolet S-10
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.