96 chevy s-10 quit running now it will crank but no start also notice since it quit i no longer have working flashers or turn signals need help 96 chevy s-10 quit running now it will crank but no start also notice since it quit i no longer have working flashers or turn signals need help on where to start trouble shooting aton where to start trouble shooting at

96 chevy s-10 quit running now it will crank but no start also notice since it quit i no longer have working flashers or turn signals need help 96 chevy s-10 quit running now it will crank but no start also notice since it quit i no longer have working flashers or turn signals need help on where to start trouble shooting aton where to start trouble shooting at 1 Answer

what is the clicking noise i hear when I try to start my 96 chevy s 10. it wont turn over at all. 6 Answers

My chevy s 10 will not turn over. All i hear is a clicking sound. The battery has been checked and is fine. all terminals and etc. are ok.

Chevy S-10 Extreme, year 2000. I have no daytime running lights or Low Beams.. 4 Answers

I replaced a Relay Switch, so now have Daytime Running lights, but still no Low Beams. Is there another Relay Switch in the box marked Fuses.. that I can replace to fix this problem?

My truck died one day while driving no light or anything then it would only crank I put a new battery in it checked the alternator it will start every now and then but when I turn my lights on it dies 1 Answer

What's the problem with it I can't quite figure it out its a 1992 Chevy s10 2.8L

why is my 1998 S-10 2.2 auto bog down very bad when I try to punch the gas. I just install a very good battery and have one on those innova 3100 abs models and it read that ther are no stored data or 3 Answers

my S-10 will bog down when I try and punch the gas. My inniva scanner says no stored data or freeze frame data either. It was running fine and then when my wife was coming home from work it started up...