I have a brake light on and I'm losing brake fluid but there is no issues in my lines and brakes are still good

I have a brake light on and I'm losing brake fluid but there is no issues in my lines and brakes are still good 2 Answers

All my brakes still run the rotors after I release the brake pedal. All brakes and rotors are good, and I have no leaks anywhere on the brake system and fluid level is rite. I have normal stopping pow 1 Answer

All my brakes still run the rotors after I release the brake pedal. All brakes and rotors are good, and I have no leaks anywhere on the brake system and fluid level is rite. I have normal stopping pow 2 Answers

If my fluid level is rite and I have no leaks and I have good braking power and pedal does not sink down , cylinders or master cylinder doesn't leak then why are all four brakes on every wheel sti...

I have a 95 dodge ram that I am having problems with no reverse. The truck is not worth enough to drop a lot of money on a new or rebuilt transmission. Im not a mechanic, but like to tinker. The truck had issues with forward gears but reversed was working, I didnt have the money to fix so I let it sit for over 3 yrs. I decided to tinker with it, I replaced the control solenoid, filter and fluid. now all forward gears work great but when I put it into reverse, It will back up slowly on its own, but if I give it gas it just revs up like its in nuetral and it vibrates like its trying to back up but wont go. Fluid level is good, nothing was found in the pan (very little shavings). Could it be air in the lines? bands need to be adjusted? or what? 1 Answer

reverse issues

I have a 2010 dodge ram 2500 5.7 Turbo Diesel. My check engine light came on and is still on. 2 Answers

I went to Autozone and they scanned and said the A/F sensor was bad. I ordered one and put it on. Light is still on. I'm not sure it there is a way to reset the light or not. Can't find a way on...