i have a 96 ram 1500. i have no spark at coil, have replaced coil,cap,wires,plugs,cranksensor,rotor,computer, and still nothiing, i am lost could someone help me
Asked by Matthew Dec 22, 2011 at 08:33 PM about the 1996 Dodge RAM 1500 Laramie SLT Club Cab 4WD
Question type: Maintenance & Repair
i have replaced coil,cap,wires,plugs,cranksensor,rotor,computer, i was looking at all my ground wires and i noticed that my ground on starter feel out of starter but it would still turn the motor over but still no spark, would this cause no spark, if no what else would it be. i have replaced as far as i kno everything that has to do with spark.
6 Answers
Have you replaced the cam sensor? Did reconnecting that ground help?
yes i have replaced camsensor,cranksensor,cap,wires,plugs,tps,iac,computer,coil,and the starter. still have no power to coil idk whats going on with it.
Check continuity at the ignition switch?
Just Had the Same problem. MAKE SURE THE CAM SENSOR AND CAM SENSOR ARE TIGHT!!! Found mine to be loose, Tightened it up and ran great! Good Luck
You probably have a bad distributor try changing the pick up coil in the distributor