Are all 318's the same!
I have a 318 out of a 1971 Dart Swinger. I want to
rebuild it to put it in a 1999 Dodge Ram. Problem
is, the Ram is fuel injected and I want to keep that
part. How much of the old 318 can be used in the
newer 318?
Asked by 1999Dodge_dude Feb 24, 2020 at 09:02 PM about the 1999 Dodge RAM 1500 Laramie SLT LB RWD
Question type: Maintenance & Repair
I have a 318 out of a 1971 Dart Swinger. I want to
rebuild it to put it in a 1999 Dodge Ram. Problem
is, the Ram is fuel injected and I want to keep that
part. How much of the old 318 can be used in the
newer 318?
I have a 318 out of a 1971 Dart Swinger. I want to rebuild it to put it in a 1999 Dodge Ram. Problem is, the Ram is fuel injected and I want to keep that part. How much of the old 318 can be used i...
1999 Dodge RAM 1500 Laramie SLT LB RWD
-
Maintenance & Repair
We want to replace my trucks enigne next summer.... So before I go and get a new engine, are the 318 and 360 the same block and can they be mounted in the same motor mounts? I have heard yes and no ...
1998 Dodge RAM 1500 ST Quad Cab 4WD
-
Maintenance & Repair
also when I turn the lights on there is this sound like an old flash on a camera coming from behind the dash?
2004 Dodge RAM 1500 SLT Quad Cab 4WD
-
Maintenance & Repair
i replace fuses everything works until i drive it then they all blow but i still have headlights
1997 Dodge RAM 1500 LT LB 4WD
-
Maintenance & Repair
Will my transmission from my 3.9l v6 magnum bolt up to the 318 v8?
1997 Dodge RAM 1500
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.