01 RAM 1500 5.9 no spark
Driving and stalled out randomly 167,000
miles on it clean as a whistle had 3 injector
open circuit codes, checked fuel pressure,
good 46 psi, no spark, needed tune up
anyway, did that, plugs wired cap and rotor
everything looked fine, two plugs 7/8 had the
classic my plenum is shitting out so I did a
plenum gasket, got back to the diag for
original issue,
Replaced:
Timing chain (was sloppy)
Plenum seal
Front cover seal
Plugs wires cap an rotor
Ignition coil
Used test light at ignition coil an have No
spark, bout to check the crank sensor can't
get the damn thing out any advice?