I have a 03 1500 dodge 4.7 and all 3 of my brake lights are out? My running lights all work what fuses should I check to see if they need to be replaced?

I have a 03 1500 dodge 4.7 and all 3 of my brake lights are out? My running lights all work what fuses should I check to see if they need to be replaced? 1 Answer

I have 06 Dodge Ram 1500 4.7 and my brake lights doesn't work I have change Brake light and check fuses 1 Answer

When I cut the headlight on they are on have power but you push the brake down nothing happens some help please

Trying to determine if my 2004 Ram 1500 Qd cab 4wd 4.7 Liter automatic transmission is 46RE, 47RE, or 48RE so I can determine the band adjustment? Also I have never done a Band adjustment before and wonder if I should take it to a qualified Dodge mechanic, which however I do not trust dealers & most mechanics?Are the specs for band adjustment in Chilton trustworthy?Thank you for any reply I may be granted...I can turn wrenches :) 2 Answers

Trying to determine if my 2004 Ram 1500 Qd cab 4wd 4.7 Liter automatic transmission is 46RE, 47RE, or 48RE so I can determine the band adjustment? Also I have never done a Band adjustment before and w...

I have a 2001 Dodge Ram 1500. The turn signals work for a short period of time then they freeze. The signals are light on the dash, but aren't blinking. I have the problem when turning right, left, and when the hazard lights are on. I have replaced the fuse. What could the problem be? 3 Answers

Pickup has had the fuses replaced twice in the past two years. I can't seem to locate the problem and don't have the money for someone to look at it. Your advice would be very appreciated.

I have a 2007 Dodge Ram 1500 SLT with the 4.7. The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with the engine knocking. Is it possible that the 1/4" difference in length caused the pistons to strike the longer, incorrect plugs hence, that caused the knock? The shop admitted to me that the wrong plugs had been ordered. When asked if it was possible that they may have installed the incorrect ones, they told me that the thread size wasn't the same. Well, truth be told, it is the same size thread. Thanks for any input! 2 Answers

The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with th...