Here is another one for you Ac Gurus. I have a 2004 Ram 1500 4.7L Quad Cab. the issue I'm having is when I turn the Ac or Heater on I get no power to the blower motor even though the Ac compressor engages and freezes in the hood. The funny part is sometimes when I turn the ignition off and the blower switch is still on I get power to the blower and it works fine on all speed setting. My Mechanic said that it was the switch so I installed a new one today same issue only gets power to the blower motor if I play with the key in the ignition off position. Could this be a faulty Ignition Switch? What's your input? Thanks in advance for your help.

Here is another one for you Ac Gurus. I have a 2004 Ram 1500 4.7L Quad Cab. the issue I'm having is when I turn the Ac or Heater on I get no power to the blower motor even though the Ac compressor engages and freezes in the hood. The funny part is sometimes when I turn the ignition off and the blower switch is still on I get power to the blower and it works fine on all speed setting. My Mechanic said that it was the switch so I installed a new one today same issue only gets power to the blower motor if I play with the key in the ignition off position. Could this be a faulty Ignition Switch? What's your input? Thanks in advance for your help. 1 Answer

I have a 2005 Dodge Ram 1500 that the blower motor will not work in. The blower motor is new. What could make it not function? 1 Answer

I have a 2005 Dodge Ram 1500 that I can not get the heating and air to work in. I have replaced the blower motor, the blower motor resistor, the HVAC control module and the lead to the blower moto...

I have a 2007 Dodge Ram 1500 SLT with the 4.7. The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with the engine knocking. Is it possible that the 1/4" difference in length caused the pistons to strike the longer, incorrect plugs hence, that caused the knock? The shop admitted to me that the wrong plugs had been ordered. When asked if it was possible that they may have installed the incorrect ones, they told me that the thread size wasn't the same. Well, truth be told, it is the same size thread. Thanks for any input! 2 Answers

The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with th...

I have a 1996 Dodge Ram 1500 that has the lights stay on when the ignition is off and the light switch is off and no key in truck 1 Answer

The lights stay on in my 1996 dodge ram 1500 when the ignition is off and the light switch is off too. There is no key in the ignitiion either.

Trying to determine if my 2004 Ram 1500 Qd cab 4wd 4.7 Liter automatic transmission is 46RE, 47RE, or 48RE so I can determine the band adjustment? Also I have never done a Band adjustment before and wonder if I should take it to a qualified Dodge mechanic, which however I do not trust dealers & most mechanics?Are the specs for band adjustment in Chilton trustworthy?Thank you for any reply I may be granted...I can turn wrenches :) 2 Answers

Trying to determine if my 2004 Ram 1500 Qd cab 4wd 4.7 Liter automatic transmission is 46RE, 47RE, or 48RE so I can determine the band adjustment? Also I have never done a Band adjustment before and w...