ABS Trouble
Asked by 76Chevyman Jun 22, 2015 at 02:05 PM about the 2000 Chevrolet Cavalier Sedan FWD
Question type: Maintenance & Repair
I have a 2000 Cavalier and the ABS light is on. The code says that the driver's side
wheel speed sensor has no signal. I replaced the sensor and checked the wiring. No
breaks in the wires. Then I started to bleed the brakes but only got the rear brakes bled
due to rain. Now when you first start the vehicle the ABS is functioning and the light is
off but when you put it in gear and start moving the light comes back on. What do I
need to look at to try to fix the problem?
5 Answers
If you replaced the sensor,and reset the ECM,check the wiring harness for breaks or damage.
also look to see if the sensor is aligned correctly. Bad wheel bearing will cause the sensor to work correctly...