With the vehicle idling, you'll need to turn the bleeder screw (12mm) on top of the thermostat housing, where the upper expansion hose is connected. Turn the bleeder screw until either a steady flow of coolant flows out, or until the radiator cooling fans turn on. Probably takes 10-15 minutes to ensure system is bleed properly.
1995 Mercedes-Benz C-Class C 220 Sedan
-
General
Hello!I have mercedes c220 2004(150hp) but i had to change the engine(only short block-shaft+pistons) everything else if from the old engine. But i installed the 2003 cdi engine which is 143hp.Now im ...
2004 Mercedes-Benz C-Class
-
General
Shifter on D how many time should it change gears going down the road, cus mine only shifts 3 times and RPM is at 3100 at 70 mph. is this good or bad.
1996 Mercedes-Benz C-Class C 220
-
General
I dont have command navigation yet I want to take advantage of Mbrace Entertain and Wifi, how do I add that functionality? And I was told that every C300 has a router built in, how do I create a con...
2017 Mercedes-Benz C-Class C 300 4MATIC
-
General
What is the best transmission setting for driving a 2017 C300 4matic in the snow?
2017 Mercedes-Benz C-Class C 300 Sport 4MATIC
-
General
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.