Aftermarket pioneer radio no sound
I installed everything the right way but the amp
won't turn on, so the new radio turns on it shows
that the cdx-gt66upw is working but I have no
sound
did your Suburban have premium audio factory installed (like Infinity or Bose)? If so then you have a 1ohm sound system. Everything aftermarket is 2-4 ohms. So in order to get sound you need to get a bypass harness for the factory installed amp, or you could just install all new speakers. Hope this helps
I installed everything the right way but the amp won't turn on, so the new radio turns on it shows that the cdx-gt66upw is working but I have no sound
2000 Chevrolet Suburban 1500 4WD
-
Car Customization
Wired harness and no sound through speakers.
2002 Chevrolet Suburban 1500 LT RWD
-
Car Customization
I have a 04 Z71. I put a new radio in. But I didn't have enough money to buy all the stuff. So I bypassed the factory amp by cutting the speaker wires and ran them straight to the radio. But when ...
2004 Chevrolet Suburban 1500 Z71 4WD
-
Car Customization
I have a 2009 Chevy Suburban that I put 26inch aftermarket rims on but it shakes when driving highway speeds and it rubs when trying to turn what would be my best solution to fixing these issues
2009 Chevrolet Suburban 1500 2LT 4WD
-
Car Customization
Seats are in excellent shape. No rips etc.
2006 Chevrolet Suburban 1500 LS 4WD
-
Car Customization
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.