i had a bmw x5 2005 i had a fault which is DSC/4x4 inactive

i had a bmw x5 2005 i had a fault which is DSC/4x4 inactive 1 Answer

How do i reset fault codes on a BMW X5 2007 mod D ? 2 Answers

First I got a parking brake failure, then the car wouldnt start, and now I have park brake, 4 x 4 , dtc, brakepads failure codes and cant start the car.

I have a BMW X5 2012 and my oil leak is coming out of the Oil Sensor 1 Answer

I am not able to buy a NEW oil sensor so I will use some type of RTV sealant on the Gasket. Will it work!

HI, I have 2002 BMW X5 4.4, and its throwing a P0011 code which is A Camshaft Position Timing Over-Advanced or system performance Bank 1 and bank 2. 2 Answers

It idles a little weird kinda wobbles a little, but sounds good and drive good except when going 20-40 mph it shakes and then kicks out of it. The engine was just put in, could the timing be off? Sh...

i have a 2005 bmw x5 3.0, in the morning i drove about 2 miles. after a little while I started the car but wasnt even a cranking sound, then i jump start it and drove about a mile to get home. i stop the car, in morning i try to start again, in the first turn nothing happened, tryed again and it started, but i drove like about 8 mils and it was dead. while i was driving the battery sign was blinking. Then i jump start again and drove for another 4 mils to a parts store. They checked the battery and said it is fine, but the machine says 9.8 - 10 low but good, then we try to start it but it was in starting, so he jump start it agin and i drove about 15 miles, then i shut off, and restart few time, without any problem, but after a little while the alarm go of by itself. According to the Mechanic, it's the alternator or the starter. Can you please help me with it, which one you think it is alternator, starter or battery?? 4 Answers

i have a 2005 bmw x5 3.0, in the morning i drove about 2 miles. after a little while I started the car but wasnt even a cranking sound, then i jump start it and drove about a mile to get home. i sto...