99 cavalier
Asked by Carfashion2 Oct 13, 2018 at 01:02 AM about the 1999 Chevrolet Cavalier LS Sedan FWD
Question type: Maintenance & Repair
After removing the ignition switch by
customer the car security light stays
solid. Is there a way to reset it
because after 11 mins wait. It still
stays on solid no blinking. Thanks
5016028378 WhatsApp
4 Answers
Turn the switch to crank but don't start the engine, leave the key on and wait 10 minutes repeat 3 times for a total of 30 minutes, once in a while it will reser after 2 tries but 3 is the procedure I hope this helps you
Carfashion2 answered 6 years ago
I tried for 11 mins first but the light stayed on then I turned off and tried again light still stayed on solid I left it for another 11 mins turn off turn on it was still on solid note its not blinking , it stays on solid .....
Does it have the right switch? If yes you may have to get it scanned
Carfashion2 answered 6 years ago
I installed a resistor 4.7k on the yellow and black wire but it stays on solid theft light before I did that and after also it stays on with out resistor also