Can you help me with my brake problem?
I performed rear brake job, e-brake cable, shoes, spring kit, drums & bearings. E-brake works and adjusts shoes with slight drag. When foot brake is applied the adjusting wedge is pulled down as intended to compensate for wear but does not release when foot brake is released causing the brakes to stay applied. Have loosened bleeder on wheel cylinder, no pressure whatsoever and shoes stay on until wedge is moved upward through wheel stud hole. Have removed assemblies and taken to brake shop and VW shop all say it should work as intended, springs are correct, wedge is good. Any ideas on where to go from here?