Asked by Labhauler98 Feb 25, 2017 at 03:20 PM about the 1998 Chevrolet Suburban K1500 4WD
Question type: Maintenance & Repair
My 98 suburban has an issue the running
lights work in the back but not the break
lights or turn signals. Have cleaned all the
connections replaced fuses and bulbs still
nothing any help would be great
Follow the wiring from the tail light lens back to a plugin. I believe you would have to look underneath on both sides. Take the plugins apart and clean with electrical cleaner and plug back together. If you have a test light check for power at the plugin with either brake pedal depressed or the turn signal on.
My 98 suburban has an issue the running lights work in the back but not the break lights or turn signals. Have cleaned all the connections replaced fuses and bulbs still nothing any help would be...
1998 Chevrolet Suburban K1500 4WD
-
Maintenance & Repair
Front turn signals work. All rear bulbs work when tested off car. REAR turn signals do not work ON car.
1993 Chevrolet Suburban C1500 RWD
-
Maintenance & Repair
I have checked the bulbs and the fuses. I must have a short some where. Does anyone have any suggestions?
1993 Chevrolet Suburban K1500 4WD
-
Maintenance & Repair
None of the rear lights work on my 1993 Chevrolet suburban.. No reverse lights, no break lights, no hazard lights (only in the rear) no turn signals (only in the rear) and no parking lights.. All of ...
1993 Chevrolet Suburban K1500 4WD
-
Maintenance & Repair
FRONT HEADLIGHTS. FLASHING LGHTS AND TURN SIGNALS WORK. WITH KEY ON RIGHT TURU SIGNAL WORKS BUT IF YOU STEP ON THE BRAKES IT WILL START TO FLASH FAST OR IF YOU TURN ON THE HEAD LIGHTS IT WILL FLASH FA...
1999 Chevrolet Suburban
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.