96 Barletta 3.1 just died. New fuel pump. Only runs on ether. Has pressure on fuel rail. Pressure regulator or ECU? Is there a relay to energize the injectors? Checked all known fuses...all good.

96 Barletta 3.1 just died. New fuel pump. Only runs on ether. Has pressure on fuel rail. Pressure regulator or ECU? Is there a relay to energize the injectors? Checked all known fuses...all good. 2 Answers

96 Barletta 3.1 just died. New fuel pump. Only runs on ether. Has pressure on fuel rail. Pressure regulator or ECU? Is there a relay to energize the injectors? Checked all known fuses...all good. 1 Answer

where does fuel injectors get noid from 7 Answers

I have a 96 Beretta died going down the road, it has feul pressure and spark but wont fire off, i havent checked noid yet but fuse 1 is good, what gives these injectors noid

where is the hood release on the 1993 beretta ? 1 Answer

I can not find or open the hood release on my 1993 chevrolet beretta. I have pulled the hood release button inside the car, but can not open the hood from the outside. Can you help me ? zionselahhouse...

93 baretta with the 3.1. the issue is once the cars get warm it shut off. the car will start right back up but as soon as its put into gear stalls it will start right back up but has the same results 2 Answers

1993 barretta with the 3.1. the issue is once the car gets up to operating temp and its been driven for awhile it will stall out. it will start right back up but as soon as its put into gear it stal...