Keyless entry only works after opening the door using the key. After that it only works for about 30 secs or so.
Keyless entry only works after opening the door using the key. After that it only works for
about 30 secs or so.
shawndean72 answered 9 years ago
most likely the battery is almost gone, but it could be the transponder. try replacing the battery first
Happen to me too, bought new battery, new key fob and still does it. Considering getting aftermarket remote start and keyless entry.
Keyless entry only works after opening the door using the key. After that it only works for about 30 secs or so.
2007 GMC Yukon SLT2 4WD
-
Maintenance & Repair
When I start it and hold the gas at 1000rpm it stays running. But if I let off the gas it dies. Its really weird. Almost like vapor lock acting
1995 GMC Yukon SLT 4WD
-
Maintenance & Repair
bought a yukon 1999 and it stalls runs really rough not the plug or wires were just replaced 2 days ago could it be the injectors or fuel filters air cleaner can you please get me in the rite dire...
1999 GMC Yukon SLT
-
Maintenance & Repair
I have a 2001 Yukon Denali that got totaled but when I got it back my key only turns half way. And now there is no life to my truck with out a battery jumper on it. Please someone help me.
2001 GMC Yukon 4WD
-
Maintenance & Repair
I Have A 07’ Yukon SLT. And I been Having battery drainage problems lately.. it will be working Fine than one minute I while get back in it to drive and it will be Dead! Get a jump, it comes back o...
2007 GMC Yukon SLT1 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.