I need a part but cannot find it. I do not know what it is called. Anyone?

Asked by jwo3788j May 12, 2014 at 08:45 AM about the 2006 Mercury Mountaineer Premier RWD

Question type: Maintenance & Repair

I have a 2006 Mercury Mountaineer. The rear glass hatch had a metal ring mounted to it.
When the glass shut, this metal ring slid into the latch which is what held the glass
closed. This ring broke off of its mount. I need a new one but do not know what it is called
to find it.

5,445

C answered 10 years ago

which piece are you looking for.... http://www.fordparts.com/Commerce/CatalogResults.aspx?y=2006&m=Mercury&mo=Mountaineer&initSearch=1&partNo=%3C40860%20#Search or http://www.fordparts.com/Commerce/CatalogResults.aspx?y=2006&m=Mercury&mo=Mountaineer&initSearch=1&partNo=%3C42148%20#Search

1 people found this helpful.

Mark helpful

5,445

C answered 10 years ago

One link is the latch and the other is the striker. sounds like you need the striker

1 people found this helpful.

Mark helpful

Your Answer:

I need a part but cannot find it. I do not know what it is called. Anyone? 2 Answers

I have a 2006 Mercury Mountaineer. The rear glass hatch had a metal ring mounted to it. When the glass shut, this metal ring slid into the latch which is what held the glass closed. This ring broke ...

2006 Mercury Mountaineer Premier RWD

-

Maintenance & Repair
I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. The digital display says that there is a "DOOR AJAR". I have checked all the doors as bet I can and they appear closed. BUT the interior lights remain on and the alarm will not set because off the ajar message. Am I missing something? Is the computer having a brain cramp.? I can get the alarm to set if I manually shut off the interior/dash lights too off. then it will work but no interior lights on the dash. This is driving me nuts. Can uou help?Thanks,John 12 Answers

I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. T...

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
I need to know what the code p1000 means for my Mercury mountaineer 2004 2 Answers

I have a 2004 Mercury mountaineer all around drive and the code p1000 and I need to know what it is

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
how do i find out what gears i have in my 2004 mercury mountaineer AWD 1 Answer

my front diff blow so now I have to fix it but don't know what gears I have and I know I have to have the same gears in my front and rear diff

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
Unsure of what kind of hose I need. 5 Answers

I don't know anything about cars so bare with me. But a bit ago a hose in my car cracked and started spraying coolant. I went to replace it but the auto shops near me didn't have the correct diamet...

2007 Mercury Mountaineer RWD

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.