How do you install the tag mount bracket on the front bumper
th directions that came with the tag brackets are not too clear or i am just not mechanically inclined enough to figure it out. can anyone help with this?
Asked by Heathy_Boy15 Mar 31, 2007 at 11:21 PM about the 2007 Toyota FJ Cruiser 4WD
Question type: Maintenance & Repair
th directions that came with the tag brackets are not too clear or i am just not mechanically inclined enough to figure it out. can anyone help with this?
Hello Healthy_Boy15-- The fromt plate brackets on Toyotas are usually bolted right to the bumper with metal screws. You will be able to find small indentations to help you line it up correctly. Take an icepick and poke two holes in the bumper and then screw the plate bracket on. I hope this helps. Good luck from Bovan.
th directions that came with the tag brackets are not too clear or i am just not mechanically inclined enough to figure it out. can anyone help with this?
2007 Toyota FJ Cruiser 4WD
-
Maintenance & Repair
Toyota has discontinued the front skid plate
2008 Toyota FJ Cruiser 4WD
-
Maintenance & Repair
I feel there is less power on the D gear, do you think that it is related to the computer programing. Is that correct? What can be done?
2008 Toyota FJ Cruiser 4WD
-
Maintenance & Repair
Can't bleed new front right caliper. 07 Toyota FJ It actuates (no pulling). Just won't bleed
2007 Toyota FJ Cruiser 4WD
-
Maintenance & Repair
It's on the driver side and it's next to the vents on the hood on the far side
2007 Toyota FJ Cruiser 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.