Stalls on take of with jerking and codes p1700 and p0746
Asked by Gina May 22, 2018 at 12:14 AM about the 2007 Nissan Murano SE AWD
Question type: Maintenance & Repair
On take off my car shutters and
hesitates. The check engine light came
on with the codes p1700 and p0746. I
have replaced the cvt valve body,
changed trans oil and filter, replaced
the crank position sensor and nothing's
worked...I'm a single mom and am in
desperate help.
5 Answers
brotherben answered 6 years ago
Check your relay for your PCM and if it's good, have your PCM checked.
Did you ever figure out what was wrong with your car? The same thing is happening to my moms car and the exact same codes. Like you she is a single mom as well and doesn't have a bunch of spare money laying around and she needs her car for work and taking my brother to school. Thank you!
alot of the time its the transmission assembly have replaced a couple trans control module for the p0746 but with 746 coupled with the 1700 75% of the time the transmission has internal fault have to get a real scan tool on their to verify line pressure with a gauge unfortunately you need to go to a shop or find a good tech who can help you out with this issue
j_jmechanicshop answered 4 years ago
thank not even the shop or good tech cannot fine out what is wrong with it they even rebuild it same old problem
The dealership can just reprogram the computer because I just got my transmission rebuilt and they had to take it to the dealership and reprogram it for the shudder code.
