My truck is slipping over 30 mph started after I put it 4 wheel drive and it didn't want to come out of it. It's a 95 c2500 Silverado I'm not sure if it transfer case or a transmission problem

My truck is slipping over 30 mph started after I put it 4 wheel drive and it didn't want to come out of it. It's a 95 c2500 Silverado I'm not sure if it transfer case or a transmission problem 3 Answers

I have a 1961 chev n the starter just clicks but won't crank it over. It's a 283 in her n trying to get it running after like ten years or more of sitting. Any ideas?? 1 Answer

Beautiful classic just once I get it running I wanna restore it.

We have a 1993 Chev 2500 4x4 5.7L, we changed out the wiring harness, now changed the whole distributor, cap and rotor, put motor to TDC and it still not start. It will turn over but not start. 1 Answer

changed wiring harness, distributor, rotor and cap it will turn over but not start. With the spark plug wires, where do you consider #1 on the distributor?

I have a 1989 Silverado with a remanufactured tbi, new injectors, new Russell performance stainless line, an6 fittings, new ac delco fuel pump, new fuel tank and I'm only getting 6 psi at my Tbi. I have an adjustable fuel pressure regulator and new diaphragm and spring. When I kink the return line it jumps to 14psi. No kinks in the lines. Please help. 3 Answers

I have a 1989 Silverado with a remanufactured tbi, new injectors, new Russell performance stainless line, an6 fittings, new ac delco fuel pump, new fuel tank and I'm only getting 6 psi at my Tbi. I ...

2000 chevy 2500 5.7 vortec 4door is my motor blown or is it a head gasket 2 Answers

Truck over heated made clanking noise went to pull over and it shut off have antifreeze coming out of the tail pipes will still start up when i drop it in gear it cuts off is my motor shot or is ...