Over the years many different ratios have been used, depending on engine, transmission and wheel configurations. Best thing to do is look at the RPO code in the glove box of your car and find the ratio that was fitted to it that way so you can find an axle with the proper final drive. If you do not match the ratios, your transfer box can wind up and break the center diff.
Can you put a 2 wheel drive rear end in a four-wheel drive Chevy truck 1500 97
1997 Chevrolet C/K 1500 Cheyenne Extended Cab LB RWD
-
Maintenance & Repair
When I engage four wheel drive the back tires drag
1990 Chevrolet C/K 1500 Extended Cab LB 4WD
-
Maintenance & Repair
When I am rolling down hill and remove my foot from throttle and let truck coast, then go back to accelerator, it feels as if the rear end wants to veer to the right. It also has a pretty good wobbl...
1990 Chevrolet C/K 1500 WT LB 4WD
-
Maintenance & Repair
A friend and I just replaced the flex plate in my 96 Chevy Silverado half ton. My 4 wheel drive feels like it is stuck in 4 low, the lever is in 2 high. It's not shifting to other speeds as well. S...
1996 Chevrolet C/K 1500 Silverado Extended Cab 4WD
-
Maintenance & Repair
Don't know how to check this out please help me thank you
1995 Chevrolet C/K 1500 Silverado Extended Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.