I can't get my truck to start after replacing the fuel pump.

Asked by CharlesT78 Sep 04, 2015 at 03:55 PM about the 1992 Chevrolet C/K 1500 Silverado LB RWD

Question type: Maintenance & Repair

I have replaced the fuel pump on my 1992 Chevy Silverado 5.7L, and now it
won't start. I think the fuel lines have air in them, will it work itself out, or is
there a process for me to bleed them?

3,855

Rhodes2345 answered 9 years ago

you should cycle the key about 5 times for 10 seconds in run then off. can you here the fuel pump run also should be a test port on a fuel rail on top of Eng some place. see if you get fuel to it push it down like a tire valve

3 people found this helpful.

Mark helpful

Your Answer:

I can't get my truck to start after replacing the fuel pump. 1 Answer

I have replaced the fuel pump on my 1992 Chevy Silverado 5.7L, and now it won't start. I think the fuel lines have air in them, will it work itself out, or is there a process for me to bleed them?

1992 Chevrolet C/K 1500 Silverado LB RWD

-

Maintenance & Repair
why am i getting no power to the fuel pump after replacing relay and fuel pump on 96 chevy c1500 1 Answer

i have did power test. it seems as though im getting power from the orange wire where the relay goes and also from the harness under the cab that runs to the fuel pump. but no power to the exact har...

1996 Chevrolet C/K 1500 WT LB 4WD

-

Maintenance & Repair
so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...

1997 Chevrolet C/K 1500 Silverado Extended Cab RWD

-

Maintenance & Repair
I've changed transmissions in my truck and now I cannot get the thing to start 1 Answer

change back over to a 5-speed manual from an automatic transmission now I can't get my truck to start wondering what the problem could be

1990 Chevrolet C/K 1500 RWD

-

Maintenance & Repair
I have 1998 Chevy ext. Stepside truck It will not start after "mechanic" changed the fuel pump twice now. He says it's the computer that need to be replaced. I don't think that's right. 8 Answers

Truck tries to turn on but dies out as if not getting fuel. He tried to get me to replace the computer the first time. I told him just change the fuel pump. 3 days later had to "replace it" again....

1998 Chevrolet C/K 1500 Cheyenne Stepside RWD

-

Maintenance & Repair

Used GMC Sierra 1500

132 Great Deals out of 6,515 listings starting at $3,975

Used Ford F-150

320 Great Deals out of 13,991 listings starting at $1,712

Used Chevrolet C/K 2500

1 listing

Used Chevrolet Camaro

14 Great Deals out of 282 listings starting at $5,995

Used Chevrolet S-10

2 listings starting at $12,975

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

I can't get my truck to start after replacing the fuel pump.

1 Answer

Your Answer:

Shortcuts

Search Chevrolet C/K 1500 Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

I can't get my truck to start after replacing the fuel pump.

1 Answer

Your Answer:

Related Questions