Asked by Cowboy1965 Oct 22, 2015 at 04:03 PM about the 1990 Chevrolet C/K 1500 Silverado 4WD
Question type: Maintenance & Repair
marcusgarciashaker answered 9 years ago
Try unplugging the oil pressure switch and see if the pump stops. If it does replace the oil pressure switch. You can do the same with the fuel pump relay.
1990 Chevrolet C/K 1500 Silverado 4WD
-
Maintenance & Repair
I have a brand new sending unit and fuel pump and there is plenty of fuel pressure and spark cause if I take some starting fluid and spray it into the throttle body it will run fine, I'm stumped ...
1998 Chevrolet C/K 1500 Cheyenne Extended Cab RWD
-
Maintenance & Repair
What could cause this
1997 Chevrolet C/K 1500 Silverado Extended Cab LB RWD
-
Maintenance & Repair
i have did power test. it seems as though im getting power from the orange wire where the relay goes and also from the harness under the cab that runs to the fuel pump. but no power to the exact har...
1996 Chevrolet C/K 1500 WT LB 4WD
-
Maintenance & Repair
I have a 1990 chevy truck I put in new hinge pins and bushings and the door still sags and door does not latch at all
1990 Chevrolet C/K 1500 Extended Cab 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.