Asked by Douglas Nov 02, 2014 at 10:50 AM about the 2001 Chrysler Town & Country Limited LWB AWD
Question type: Maintenance & Repair
I replaced my blower motor resistor because my blower was not working now my blower motor works but can not control the speed and when I turn off the ac the blower stays on at high speed
I replaced my blower motor resistor because my blower was not working now my blower motor works but can not control the speed and when I turn off the ac the blower stays on at high speed
2001 Chrysler Town & Country Limited LWB AWD
-
Maintenance & Repair
Have a 2000 Chrysler Town and Country Limited 3.8liter van that is low idling and stalls after driving a few minutes. Oil light comes on and then the vehicle just dies. It will start up but have to ke...
2000 Chrysler Town & Country Limited LWB FWD
-
Maintenance & Repair
My 2001 Chrysler Town and Country has 2 cylinders that aren't firing have already changed the coil pack plug wires and sparkling plugs and still has a miss fire.?
2001 Chrysler Town & Country
-
Maintenance & Repair
I have a 1993 Chrysler Town and Country. I've replaced the engine coolant fan but engine is still overheating and I don't know what the problem is. Is there a diagram I can be referred to?
1993 Chrysler Town & Country LWB FWD
-
Maintenance & Repair
I went to start my can and everything comes on but the van will not start. The ETC light came on when I tried to start it again and the vehicle still won't come on. I'm not sure if it has anything ...
2013 Chrysler Town & Country
-
Maintenance & Repair
CarGurus has 118 nationwide Town & Country listings starting at $6,999.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.