How do I reset the sunroof control module on a 2008 Land Rover LR2?

ASK THAT QUESTION IN YOUR SEARCH ENGINE....EASY TO DO....AND FIND OUT ALL THE TRICKS....BE GOOD...K

Thanks Kelly. That was the first thing I did - there is no process for a 2008 LR2. I've tried the others suggested - hold the switch forward (or backward) for 20 seconds (or 30 seconds). No change... guess I'm just trying to get out of replacing the switch or motor LOL.

BUT???? DOES IT MOVE NOW ????

No. It's dead. No "click" when I reset the module using the process(es) found in the search.

Had this happen in my rover too. All you do is....with the power off, key out of ignition...pull the 15 amp fuse for the sunroof out for a few seconds...then reinstall it...make sure it is not blown 1st....then start the rover and the sunroof should work fine.. this resets the module.

Lost sunroof power on my 08 LR2 after the battery died because of accessories left on. I found the 15A fuse under the glove box (F10) and pulled it (not blown) reinserted it, started the car and wahlah! It works once again! Thanks for the tip!!

Thanks Doug. You helped me solve my frozen sunroof with this.

2009 Land Rover LR2-HSE Removed F10 fuse (15A), replaced after 1 minute. Started engine and it worked. Make sure key not in place while removing fuse.

I tried that and it’s still not working. Any thing else I can try?

Guys! HELP!!!! My 2000 Discovery was given to my daughter on her 16th birthday. BOTH the sunroofs do not work! I’m trying to figure this out!!! How can BOTH of them NOT WORK at the same time??? I looked at the fuse and it’s good!! HELP!!