No spark
Replaced battery, terminals are good, fuel pump is working
and I have pressure, replaced the ignition coil and still no
spark. It'll crank but won't turn over.
beatupchevy answered 5 years ago
You mean it'll crank but not start , cranking and turning over are the same thing , what about the ignition module ? Are the injectors firing ? If not it may be a crank/cam sensor . Things should be tested before you spend money on new parts .
I have no spark and I replace I know no making it start
1996 Chevrolet Tahoe LT 2-Door 4WD
-
Maintenance & Repair
Replaced battery, terminals are good, fuel pump is working and I have pressure, replaced the ignition coil and still no spark. It'll crank but won't turn over.
2000 Chevrolet Tahoe LT RWD
-
Maintenance & Repair
I have a 1999 Tahoe. I have replaced the distributor, coil, pickup coil and crankshaft sensor and still have no spark. Someone please help me on this one. I am getting voltage to my coil and dist...
1999 Chevrolet Tahoe LS 2-Door RWD
-
Maintenance & Repair
Replaced crank and cam sensors, ignition module, coil and distributor, cap and rotor but the engine still won't turn over. It cranks but no spark up top at the coil. I tested all the parts on anot...
1999 Chevrolet Tahoe LS 4-Door 4WD
-
Maintenance & Repair
I have replaced everything. Even ignoring cylinder and still no start. Do I need to change the Ignition housing too
1999 Chevrolet Tahoe LT 4-Door 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.